Wahl Clipper Corporation

Wahl Clipper Corporation

Supplier Document Center

Supplier Portal / Packaging & Printed Material
Sourcing — Packaging Quality

Packaging & Printed Material Specifications

Quality inspection standards, dimensional tolerances, defect classifications, and material requirements for all Wahl Clipper Corporation packaging components. This document governs supplier production and acceptance criteria for all packaging types.

Document No. WPKG-PRINT-001
Revision Rev 06
Status Draft — Under Review
Sections 16
Owner C. Kuntzi — Sourcing
Spec

Specification Documents

Questions? Contact sourcing@wahlclippers.com
Rev06 is currently in draft review. Suppliers may review the current draft and submit questions to the Sourcing team. Rev06 supersedes Rev05 upon final release. Do not distribute externally.
WPKG-PRINT-001 Packaging & Printed Material Specification — Rev06 Draft

Full quality spec covering inspection methods, AQL, defect classification, dimensional tolerances, and material requirements for all packaging types including paper, plastic, molded fiber, fabric pouches, EVA cases, and delivery packaging systems.

16 sections AQL 0.65 Draft
WSQA-001 Supplier Quality Agreement

Master quality agreement defining AQL acceptance, corrective action requirements, claim procedures, and supplier accountability terms.

Coming Soon
WPQD-PALLET-001 Pallet Quality Standard

Grade classification, dimensional requirements, and inspection criteria for all inbound pallets supplied to Wahl Clipper facilities.

Coming Soon
WART-SUB-001 Artwork & Pre-Press Submission Guide

File format requirements, color profiles, bleed and safe zone standards, and submission procedures for all packaging artwork approvals.

Coming Soon
Coverage

Specification Scope — Rev06

Section Category Key Content
5.0POS Box, Sleeve & Insert (Paper / SBS / CRB)Dimensional tolerances, defect classification, bleed & registration
6.0POS Box, Sleeve & Insert (Plastic / PET)Dimensional tolerances, defect classification
7.0Master Carton & InsertECT rating, slot/fishtail tolerances, insert flatness
8.0LabelsDie-cut, registration, adhesion, roll stock tolerances (TLMI)
9.0Documentation / IFUTrim size, fold registration, GSM caliper, color density
10.0Pulp Trays & LidsDimensional, wall thickness, warp, lid fit
11.0Plastic Thermoformed Tray / LidDimensional, wall thickness, warp, clarity
12.0PalletizingOverhang, board gap, splinter threshold
13.0Molded Fiber — Dry Press & Wet PressProcess overview, dimensional, structural, moisture, ISTA/TAPPI
14.0Fabric Pouches with ZippersSewing, zipper, embroidery, loose thread & gap standards
15.0EVA CasesShell, foam, zipper, logo/mark tolerances, drop & compression
16.0Delivery & Transit Packaging ProtectionSupplier accountability, desiccant, liner, inbound inspection
Contact

Sourcing Contacts

Name Role Scope Email
Christopher Kuntzi Director, Sourcing & Packaging Specifications, supplier agreements, quality standards ckuntzi@wahlclippers.com
Sourcing Team General Inquiries PO questions, document submissions, general supplier support sourcing@wahlclippers.com